The new HikMicro Stellar 3.0 SQ50L thermal imaging scope features "Next Generation" thermal technology, with an all new 640x512 thermal sensor, with staggering sub 15mK NETD sensitivity, leading sensor technology and innovative software, to create the ultimate thermal riflescope for foxing and deer stalking. Not only does this help you to positively identify animals but also gives you a clear view of the surroundings and background. This highly accurate thermal sensor will also continue to deliver in the most challenging conditions, such as rain and fog.

The Stellar 3.0 introduces many innovations to enhance your hunting experience including shutterless technology and the integrated Laser Range Finder (LRF) which allows you to access HIKMICRO’s advanced ballistic calculator while retaining the traditional appearance of your scope.

With 3.6x to 26.6x magnification, the Stellar SQ50L 3.0 delivers up to 2600m detection range, with immersive long range detail.

The 1000m LRF discreetly fits inside the front objective lens which allows you to accurately judge the distance to your target without compromising the traditional look of your rifle. The built-in ballistic calculator displays the holdover point on your reticle, making it possible to accurately adjust for shooting at different distances, even in total darkness.

The new viewfinder screen delivers an immersive experience, with an exceptionally wide field of view. You can customise the display to give you all the information you need in a rounded viewing area that will feel familiar to anyone who has used a traditional optical scope.

In addition to the latest hardware, HIKMICRO are committed to developing advanced software to enhance your hunting experience. The Stellar 3.0 is loaded with new technology like Image Pro 2.0 which uses intelligent algorithms to build extra detail to the image.

Another unique technology which is set to revolutionise your thermal shooting experience is shutterless technology. The shutter is used in traditional thermal devices to control image noise. It is a physical process which requires your image to freeze for a few seconds to complete. During that interruption it is impossible to take your shot. To avoid this problem, HIKMICRO have developed software which has replaced the physical shutter and removed this problem.

Powered by a combination of internal batteries and a removable 18650, the Stellar 3.0 delivers an impressive run time of 9 Hours. The display also shows you the status of the internal battery and the external battery separately so it is easy to manage your power consumption.

Features:

Next Generation Thermal Sensor Technology

640x512 sub 15mK NETD sensitivity

Up to 2600m detection range

Shutterless technology

3.6x to 26.6x variable magnification

Ballistic Calculator with 1000m LRF

High shock resistance up to 1,000 g/0.4 ms

Technical specifications:

Image sensor: VOx uncooled focal plane

Resolution: 640 × 512

Frame rate: 50 Hz

Pixel interval: 12 μm

Response waveband: 8 μm to 14 μm

NETD: Less than 15 mK (@ 25°C, F# = 1.0)

Lens (focal length): 50 mm, F1.0

Focus mode: Focus ring

Detection range: 2,600 m

Focus distance: 5 meters

Magnification: 3.6×-26.6×; Support 1× step value of continuous zoom

Field of view (H×V), degree/m @100 m: 8.8°× 7.0°/15.4 m × 12.3 m

Exit pupil: 6 mm

Eye relief: 45 mm

Diopter (range): -5D to 3D

Battery type: Two rechargeable lithium batteries (internal), one replaceable and rechargeable 18650 battery (external)

Battery life: 9 hours continuous use (@ -20°C, Zoom Pro, LRF on)

Protection Level: IP67

Dimensions: 422.5mm × 88.4mm × 74.5mm

Weight: 860g without external battery

Working Temperature: -30°C to 55°C (-22°F to 131°F)

Laser Safety Class 1 with wavelength 905nm and measurement range 1,000 m