A-TEC H2 A-LOCK 6.5 mm Suppressor

A-TEC H2 A-LOCK 6.5 mm Suppressor

A-TEC H2 A-LOCK 6.5 mm Suppressor

  • Brand:A-tec Norway
  • Product Code: H2 A-Lock - кал. 6,5
  • Availability: In Stock
  • 289.00 € / 565.23 лв.

    365.57 € / 714.99 лв.
  • 18 11 2026 02 12 2026

Available Options


Buy with

13 x €26.18

A-TEC NORWAY · HERTZ 2 · A-LOCK MINI · 6.5 MM
A-TEC H2 A-LOCK Suppressor – 6.5 mm

Norwegian engineering. The advanced Hertz 2 generation. Modular Over-Barrel construction with the dedicated A-LOCK Mini mounting interface.

A-TEC H2 A-LOCK 6.5 mm brings together the refined H2 suppressor design and a specialised mounting system developed for convenient attachment and removal using a compatible adapter.

This model belongs to the 6.5 mm / .264 calibre group and features an A-LOCK Mini interface rather than a fixed direct-thread connection.

The standard three-module H2 configuration has an overall length of 230 mm, an added length of 150 mm and an outside diameter of 49.4 mm.

The published acoustic performance for the standard H2 test configuration is 33 dB(C) of overall sound reduction.

Key distinction: Hertz 2 construction, A-LOCK Mini interface, three modules, Over-Barrel geometry and Norwegian engineering.
A-TEC H2 A-LOCK 6.5 mm suppressor product view
A-TEC H2 A-LOCK 6.5 mm · Product view
A-LOCKDedicated mounting interface
6.5 mm.264 calibre group
33 dB(C)Published H2 reduction
230 mmH2 overall length
A-TEC H2 A-LOCK – Hertz 2 Technology

A-TEC H2 represents the second generation of the Norwegian Hertz suppressor family, combining refined internal geometry, modular construction and an emphasis on acoustic performance.

The H2 A-LOCK version incorporates a dedicated mounting interface, distinguishing it from conventional H2 models with direct barrel threads. The system works with compatible A-LOCK Mini adapters, available in different thread configurations.

Its three-module construction and Over-Barrel layout are characteristic of the H2 family. Part of the suppressor extends rearwards over the barrel, resulting in a shorter added length than the overall suppressor length.

The H2 A-LOCK belongs to A-TEC's specialist hunting equipment range and is intended for lawful use in accordance with all applicable technical and safety requirements.

Eight Distinguishing Features
01 · A-LOCK MINI
Dedicated Mounting Interface

A-LOCK Mini connection technology, different from conventional direct-thread suppressor configurations.

02 · NORWEGIAN ENGINEERING
Norwegian Design

An established A-TEC product family focused on construction quality and acoustic performance.

03 · HERTZ 2
Advanced Generation

Further development of the Hertz family with improved internal geometry and engineering details.

04 · MODULAR DESIGN
Three-Module Configuration

The standard full-length H2 configuration incorporates three sound-reduction modules.

05 · OVER-BARREL
Space-Efficient Geometry

Part of the suppressor body extends rearwards over the barrel.

06 · ACOUSTIC DESIGN
Published Acoustic Results

33 dB(C) overall reduction under the published test conditions for the standard three-module H2.

07 · CALIBRE GROUP
6.5 mm / .264

The designated calibre group of this particular model, distinct from .223 and .30 versions.

08 · MATERIALS
Combined Construction

Aluminium structural components combined with a steel component in the first baffle area.

A-TEC TECHNOLOGY · MOUNTING INTERFACE
A-LOCK Mini – What Makes It Different?

A-LOCK Mini is a dedicated A-TEC mounting system connecting the suppressor to a separate compatible adapter instead of directly threading the suppressor onto the barrel.

The system uses a short-rotation locking principle. This enables convenient attachment and removal without repeatedly rotating the suppressor through the full length of a conventional thread.

01 · A-LOCK InterfaceThe suppressor features the dedicated A-LOCK Mini mounting connection.
02 · Separate AdapterAdapters are available with different barrel-thread specifications, depending on the individual version.
03 · Professional CompatibilitySelection and fitting of a suitable adapter require assessment by a qualified professional.

Important: The A-LOCK Mini adapter is a separate accessory and is not included in the suppressor price.

Actual compatibility depends on the complete configuration and the specifications of the individual components.

A-LOCK vs Direct Thread – The Difference
A-LOCK MINI VERSION
A-TEC H2 A-LOCK 6.5 mm

Uses the specialised A-LOCK Mini connection and requires a separately selected compatible adapter.

DIRECT-THREAD VERSION
Standard A-TEC H2

Other H2 configurations may feature a fixed factory thread corresponding to a particular barrel-thread specification.

Essential distinction: The thread on an A-LOCK Mini adapter is not a direct thread on the suppressor itself. These are different components of the mounting system.
Hertz 2 – Three-Module Construction
Norwegian Modular Architecture

The H2 family uses the modular architecture developed for the next generation of Hertz suppressors.

The standard full configuration contains three modules. This is the reference configuration for the published principal dimensions and acoustic performance figures.

The modular design combines internal baffles with an aluminium-alloy construction and additional steel components.

The H2 engineering concept differs from the all-steel construction associated with the A-TEC AR family.

3Modules
49.4 mmOutside diameter
Hertz 2Second generation
Care and servicing: Maintenance must follow A-TEC instructions. Mounting compatibility and technical condition should be assessed by a qualified specialist.
Acoustic Performance – A-TEC H2

The published figures for the standard three-module H2 distinguish between first-shot reduction, overall reduction and the highest recorded measurement.

32.6 dB(C)First-shot reduction
33 dB(C)Overall reduction
35 dB(C)Best recorded result

These values refer to the published test configuration of the three-module H2, tested using .308 Winchester.

They describe the H2 platform under those test conditions and are not separate measurements specifically established for the 6.5 mm A-LOCK variant.

dB(C) denotes C-weighted decibels used in sound-pressure measurements. Actual performance varies with the specific conditions.

H2 Acoustic Performance Diagram
Understanding the Test Results

The diagram illustrates the measured sound-reduction results, including the overall value of 33 dB(C).

The first shot is assessed separately, while 35 dB(C) represents the highest reduction recorded during the published series of tests.

These measurements do not mean that the impulsive sound is completely eliminated.

A-TEC H2 acoustic reduction diagram showing published decibel measurements
A-TEC H2 series · Acoustic performance diagram
Hearing protection: A suppressor does not remove the need for appropriate hearing protection when exposed to impulsive noise.
Over-Barrel – Construction and Dimensions

Over-Barrel describes a configuration in which part of the suppressor body extends behind the muzzle, over the barrel.

230 mmOverall length
150 mmAdded length
80 mmRear section
H2 LENGTH DISTRIBUTION
80 mm · Rear section
150 mm · Added length
Over-BarrelTotal: 230 mm

The outside diameter is 49.4 mm. The stated maximum barrel diameter in the rear section is Ø23.7 mm.

These dimensions describe the standard three-module H2. The particular A-LOCK mounting configuration and its adapter must also be considered when evaluating the complete assembly.

6.5 mm / .264 – Exact Version Identification
CALIBRE GROUP
6.5 mm / .264

The calibre-group designation of this H2 A-LOCK model.

MOUNTING SYSTEM
A-LOCK Mini

Dedicated factory connection rather than a fixed direct thread.

CONSTRUCTION
Hertz 2

Second-generation modular Over-Barrel suppressor architecture.

ADAPTER
Separate Accessory

A compatible A-LOCK Mini adapter is selected separately according to the specific application.

Compatibility: The calibre group and mounting interface alone do not establish suitability for any particular firearm. Compatibility must be assessed by a qualified professional.
Full Technical Specifications – A-TEC H2 A-LOCK 6.5 mm
SpecificationTechnical Details
BrandA-TEC
ManufacturerA-TEC AS
Country of originNorway
Product seriesH2 / Hertz 2
ModelH2 A-LOCK
Product typeFirearm suppressor
Calibre group6.5 mm / .264
Mounting interfaceA-LOCK Mini
Direct mounting threadNo – separate A-LOCK Mini adapter required
Adapter includedNo, sold separately
ConstructionModular
Standard H2 configuration3 modules
DesignOver-Barrel
H2 overall length230 mm
H2 added length150 mm
Rear section80 mm
Outside diameter49.4 mm
Maximum barrel diameter in rear sectionØ23.7 mm
Standard three-module H2 weight410 g, excluding the separate A-LOCK Mini adapter; the actual A-LOCK assembly weight may differ
Overall H2 acoustic reduction33 dB(C)
First-shot reduction in published test32.6 dB(C)
Best recorded result35 dB(C)
Acoustic diagram test calibre.308 Winchester
MaterialsAluminium and steel components
FinishBlack
Intended useRegulated hunting applications
Purchase conditionsPhysical-store purchase only, subject to all applicable legal requirements
What Is Included?
01 · MAIN PRODUCT
A-TEC H2 A-LOCK

One A-TEC H2 A-LOCK suppressor in the 6.5 mm / .264 calibre group.

02 · IDENTIFICATION
Factory Markings

Original product markings and accompanying documentation as supplied with the specific factory package.

The A-LOCK Mini adapter is not included. Additional accessories are available separately, subject to availability and the specific factory configuration.
Maintenance and Safety

Proper care of the A-TEC H2 A-LOCK is important for maintaining the condition of both the suppressor body and the mounting interface.

Moisture Protection

Storage should follow the manufacturer's recommendations for protecting the construction against corrosion.

Heat Safety

The suppressor can become extremely hot. Contact with heated components must be avoided.

Professional Inspection

The condition and compatibility of the A-LOCK connection should be checked by a qualified professional.

Technical Servicing

Any technical intervention must comply with the applicable A-TEC service instructions.

Hearing protection: Sound reduction does not eliminate the need for appropriate hearing protection.
Frequently Asked Questions – A-TEC H2 A-LOCK 6.5 mm
What is the exact model?

A-TEC H2 A-LOCK, calibre group 6.5 mm / .264.

What does H2 stand for?

Hertz 2, the second generation of A-TEC's Hertz suppressor family.

What is A-LOCK Mini?

A dedicated mounting interface connecting the suppressor to a compatible separate adapter.

Does it have a direct 5/8"-24 UNEF thread?

No. The suppressor uses the A-LOCK Mini interface. Adapters are available with various thread specifications.

Is the A-LOCK Mini adapter included?

No. The adapter is purchased separately.

Are all A-LOCK Mini adapters identical?

No. They are available with different factory thread specifications.

Can it be used with any A-LOCK adapter?

Compatibility of the specific components must be confirmed by a qualified professional.

How does the H2 A-LOCK differ from a standard H2?

The principal difference is the mounting interface. A-LOCK uses a separate adapter, whereas direct-thread H2 models have a fixed thread.

Which calibre group does this version cover?

6.5 mm / .264.

How many modules does the standard H2 have?

Three modules in the standard full configuration.

What is an Over-Barrel suppressor?

Part of the suppressor body extends behind the muzzle, making the added length shorter than the total body length.

What is the overall length?

230 mm for the standard three-module H2 configuration.

What is the added length?

150 mm for the standard H2 configuration.

What is the outside diameter?

49.4 mm.

How much does it weigh?

The standard three-module H2 is listed at 410 g. The complete A-LOCK configuration may have a different weight, and the separate adapter has its own weight.

What is the published overall sound reduction?

33 dB(C) for the standard H2 under the published test conditions.

Which calibre was used for the acoustic diagram?

.308 Winchester. The diagram is not a separate acoustic test of the 6.5 mm version.

What materials are used?

The H2 combines aluminium structural components with steel elements in the internal construction.

Is A-TEC a Norwegian manufacturer?

Yes. A-TEC is a Norwegian manufacturer specialising in suppressor technology.

Can this product be purchased online?

No. Purchase is available only at the MoskovHunt physical store, subject to applicable legal requirements.

Explore A-TEC Products at MoskovHunt

The A-TEC range includes various construction concepts and specialist products from the H2, AR, Optima and other Norwegian-developed product families.

EXPLORE A-TEC NORWAYNorwegian engineering · Product information and specialist advice
Why Choose MoskovHunt?
Precise Product Identification

Clear identification of the 6.5 mm H2 A-LOCK without confusing it with direct-thread H2 versions.

A-LOCK Mini Expertise

Clear information about the suppressor, its mounting interface and the separately required adapter.

Detailed Specifications

Construction dimensions, materials and published acoustic performance figures for Hertz 2.

In-Store Consultation

Information on documentation, legal requirements and professional compatibility assessment.

Important Legal Information

A-TEC H2 A-LOCK 6.5 mm is a firearm suppressor. Its acquisition, possession, storage and use are governed by applicable legislation.

This product is not sold online. Purchase takes place exclusively at the MoskovHunt physical store, in full compliance with all legal requirements.

Adapter selection and compatibility require professional technical assessment. All manufacturer's instructions and safety precautions must be followed, including the use of appropriate hearing protection.

A-TEC H2 A-LOCK 6.5 mm at MoskovHunt

Norwegian Hertz 2 technology · A-LOCK Mini · 6.5 mm / .264 · Three-module design · Over-Barrel · Published H2 acoustic reduction of 33 dB(C).

For information about technical specifications, availability, A-LOCK adapters and legal purchase requirements, contact the MoskovHunt team.

+359 894 462 621 · Viber / WhatsApp
+359 896 811 177 · Viber / WhatsApp

MoskovHunt · 37 Tsar Simeon Street, 5900 Levski, Bulgaria.



Write a review

Note: HTML is not translated!
    Bad           Good
Captcha