Bekina MidliteX SolidGrip O4 Waterproof Boots – Green
Bekina MidliteX SolidGrip O4 Waterproof Boots – Green
- Brand:Bekina Boots
- Product Code: MidliteX SolidGrip O4 – NEOTANE, −30°C
- Availability: In Stock
-
69.00 € / 134.95 лв.
Available Options
Bekina MidliteX SolidGrip O4 BootsBelgian Quality • Waterproof NEOTANE® Construction • SolidGrip SR • Insulation Down to −30°C
Bekina MidliteX SolidGrip O4 Green/Black are premium Belgian polyurethane boots developed for extended walking and working in wet, cold and demanding environments. Thanks to advanced NEOTANE® technology, they combine low weight, excellent flexibility, thermal insulation and a fully waterproof construction. The SolidGrip outsole delivers tested slip resistance, while the wider fit and anatomical footbed provide lasting comfort throughout the day. A practical choice for hunting trips, fishing, farm work, woodland activities and everyday outdoor use.
MidliteX SolidGrip – All-Day Comfort in Challenging Conditions
Not every waterproof boot strikes the right balance between weight, thermal insulation, traction and comfort. Bekina MidliteX SolidGrip is designed to achieve exactly that: a sturdy and practical boot that remains light and flexible enough for active outdoor use.
Instead of a conventional heavy rubber construction, these boots use NEOTANE®, a specialised polyurethane material. Its microcellular structure contains numerous tiny air bubbles, helping reduce overall weight and improve insulation.
The practical shaft profile protects against water, mud and wet vegetation, while the generous fit gives the foot additional room.
These boots are particularly suitable for people who spend long hours outdoors, whether hunting, fishing, working in agriculture, walking through woodlands or maintaining gardens and rural properties.
Eight Key Advantages
A specialised microcellular structure that combines reduced weight, flexibility and thermal insulation.
An impermeable outer structure that keeps water, mud and moisture from entering the boot.
NEOTANE® helps limit heat loss and provides insulating properties for cold environments.
Tested slip resistance and a pronounced tread pattern for wet and contaminated surfaces.
Generous internal space and a removable, dual-layer anatomical insole for long periods of wear.
A specially shaped rear heel projection makes the boots easier to take off without using your hands.
Suitable for contact with fats, manure and certain chemicals within the material's specified resistance limits.
Specialist footwear developed and manufactured in Belgium, with emphasis on quality and functional longevity.
NEOTANE® – The Technology Behind Lightweight Insulation
NEOTANE® is a specially developed polyurethane material with a robust outer surface and a microcellular interior.
1. Sealed outer layer: the durable, impermeable surface acts as a barrier against water and everyday contaminants.
2. Air-filled microcells: countless microscopic air pockets help reduce weight while supporting thermal insulation.
3. Insulating inner structure: the material helps restrict heat transfer during prolonged use.
Compared with conventional heavy rubber boots, this construction offers a valuable combination of low weight, flexibility, durability and cold-weather comfort.
Another important feature is that MidliteX SolidGrip boots are PVC-free.
Thermal Insulation Down to −30°C
One of the standout qualities of MidliteX SolidGrip is the insulating performance of NEOTANE®, with a stated insulation level suitable for temperatures down to −30°C.
This figure refers to the insulation performance under the applicable test conditions. Actual foot comfort depends on exposure time, physical activity, sock choice, moisture and individual sensitivity to cold.
During autumn and winter outdoor activities, fishing near water, work in wet environments and movement through damp woodland, this insulation provides an important advantage compared with standard non-insulated footwear.
For optimal comfort, choose functional socks suitable for the temperature and a boot size that leaves enough room for the foot without excessive pressure.
SolidGrip – Traction Designed for Difficult Surfaces
The SolidGrip outsole is designed for dependable contact with a wide range of surfaces, including wet or contaminated areas.
The SR designation indicates tested slip resistance under the applicable footwear standard. Its functional outsole geometry and deep tread contribute to traction in mud, on wet pathways and across challenging ground.
The outsole features a 9 mm tread depth and a pronounced heel profile designed to support stable contact with the ground.
A dedicated Ladder Grip area provides additional traction geometry for ladder-related work.
Slip-resistant footwear reduces risk under specified conditions but cannot eliminate the danger of slipping on ice or severely contaminated or unstable surfaces.
Generous Fit and Anatomical Insole
A comfortable fit matters when boots are worn for many hours. MidliteX SolidGrip offers more generous internal space, including room for suitable thicker socks.
The removable anatomical insole has two layers: a hard-wearing textile upper layer and polyurethane foam underneath.
The top textile layer is approximately 0.70 mm thick, while the cushioning layer varies from 3 to 7 mm, depending on the area.
The insole can be removed and washed at 30°C, making routine hygiene and maintenance easier.
In the reference size EU 42, the pair weighs approximately 1320 g, or about 660 g per boot.
Designed for Convenient Everyday Use
The generous opening and flexible polyurethane construction make daily use straightforward.
NEOTANE®, the anatomical footbed and SolidGrip outsole contribute to all-day comfort.
The rear Kick-Off Spur makes removal easier, and the smooth outer surface is simple to rinse clean.
Where Do These Boots Perform Best?
Waterproof protection, pronounced traction and low weight for damp woodland paths and outdoor trips.
A practical option for muddy banks, wet ground and activities involving frequent contact with water.
Suitable for typical agricultural contaminants, including manure, fats and selected chemical substances.
Comfortable boots for land maintenance, gardening and extended use around rural properties.
O4 – Occupational Footwear Without a Safety Toe Cap
Bekina MidliteX SolidGrip is classified O4 under EN ISO 20347:2022+A1:2024. This standard applies to occupational footwear without a protective safety toe cap.
The model features antistatic properties, waterproof construction and tested slip resistance. It does not have a safety toe cap or a protective penetration-resistant midsole.
Where there is a risk of heavy objects falling onto the foot or sharp objects penetrating the sole, appropriately certified safety footwear is required.
Complete Technical Specifications
- Manufacturer
- Bekina Boots
- Country of manufacture
- Belgium
- Model
- MidliteX SolidGrip O4
- Factory model code
- XMN1P/9180A
- Product reference
- XMN1P/9180AP203
- Colour
- Green / Black
- Material
- NEOTANE® specialised polyurethane
- Waterproofing
- Yes, impermeable construction
- PVC content
- PVC-free
- Lining
- Polyester textile with PU coating
- Lining construction
- Welded and knitted lining seams
- Weight, EU 42 pair
- Approximately 1320 g
- Size range
- EU 36–49
- Standard
- EN ISO 20347:2022+A1:2024
- Classification
- O4 – without safety toe cap
- Slip resistance
- SR
- Antistatic properties
- Yes
- Thermal insulation
- Down to −30°C
- Fit
- Wide Fit
- Boot removal
- Rear Kick-Off Spur
- Ladder traction
- Ladder Grip
- Chemical resistance
- Fats, manure and selected chemicals, subject to compatibility
- RFID
- Integrated RFID element
- Outsole
- SolidGrip / NEOTANE®
- Tread depth
- 9 mm
- Heel tread depth
- 14.6 mm
- Heel energy absorption
- 30–40 J (test value)
- Insole
- Removable, anatomical, dual-layer
- Insole upper layer
- Textile, 0.70 mm
- Insole lower layer
- Polyurethane foam, 3–7 mm
- Insole washing temperature
- 30°C
- Last length
- 280 mm
- Boot height, size table
- 230 mm
- Upper circumference
- 400 mm
Bekina MidliteX SolidGrip Size Guide
Choosing the right size helps maintain comfort, stability and thermal insulation. The following table shows the boot's factory last dimensions and upper measurements.
| EU Size | Last Length | Boot Height | Upper Circumference |
|---|---|---|---|
| 36 | 241 mm | 205 mm | 350 mm |
| 37 | 247 mm | 205 mm | 360 mm |
| 38 | 253 mm | 210 mm | 370 mm |
| 39 | 260 mm | 220 mm | 380 mm |
| 40 | 267 mm | 225 mm | 390 mm |
| 41 | 273 mm | 230 mm | 390 mm |
| 42 | 280 mm | 230 mm | 400 mm |
| 43 | 287 mm | 235 mm | 410 mm |
| 44 | 294 mm | 240 mm | 410 mm |
| 45 | 300 mm | 245 mm | 420 mm |
| 46 | 307 mm | 245 mm | 430 mm |
| 47 | 314 mm | 250 mm | 440 mm |
| 48 | 320 mm | 250 mm | 440 mm |
| 49 | 327 mm | 255 mm | 450 mm |
How to use this chart: Last length is the manufacturer's internal last measurement, not the recommended length of your bare foot.
Allow appropriate additional room, often around 10 mm, for comfortable movement and thicker socks. Also check the upper circumference if you plan to tuck trousers into the boots.
What Is Included?
- One pair of Bekina MidliteX SolidGrip O4 boots in the selected size.
- Two removable, dual-layer anatomical insoles, one fitted inside each boot.
The insoles can be removed for cleaning or replacement when necessary.
Cleaning and Maintenance
After use, remove dirt and mud with water and a soft brush. Clean the polyurethane outer surface without abrasive tools or aggressive cleaning techniques.
Allow the boots to dry naturally in a ventilated area, away from direct sources of intense heat.
Remove the insoles periodically to air the interior. The removable insoles can be washed at 30°C.
Before prolonged exposure to specific chemical substances, check compatibility with NEOTANE® and follow the applicable safety instructions.
Bekina Boots – Belgian Footwear Expertise Since 1962
Bekina Boots is a Belgian manufacturer with a history dating back to 1962, specialising in practical occupational and outdoor boots made from advanced polyurethane materials.
NEOTANE® technology reflects decades of expertise in developing materials and production methods designed to combine reduced weight, durability, insulation and comfortable wear.
MidliteX SolidGrip is a compelling example of this approach: a functional boot with thoughtful ergonomics, effective traction and a material construction designed for demanding everyday use.
Explore More Hunting and Outdoor Footwear
Discover more hunting boots, outdoor footwear and equipment at MoskovHunt, with options designed for wet terrain, changing seasons and different activity levels.
Choose footwear based on the season, shaft height, outsole design, intended use and the degree of protection required against water and cold.
Frequently Asked Questions
Looking for lightweight, waterproof and insulated boots for hunting, fishing or outdoor work? Contact the MoskovHunt team for size availability, fit advice and more information about Bekina footwear.
-12%
Percussion Natureland Men's Rubber Boots – Natural Rubber
36.00 € / 70.41 лв. 41.00 € / 80.19 лв.
-10%
Hunting Boots Chiruca Torcaz 01 GTX 406901 – GORE-TEX, Cordura
161.00 € / 314.89 лв. 179.00 € / 350.09 лв.
-10%
Zamberlan 252 YEREN GTX® RR Hiking Boots Almond
159.00 € / 310.98 лв. 176.91 € / 346.01 лв.
Men’s Härkila Reidmar Mid 2.0 GTX Hunting Boots – Dark Brown
340.00 € / 664.98 лв.
Lemigo Grenlander 862 EVA Boots – Removable Thermal Liner
33.00 € / 64.54 лв.
Zamberlan 4016 LYNX FGL GTX RR BOA WL Hunting Boots
308.00 € / 602.40 лв.