Convoy C8 / C8+ Remote Pressure Switch – Dual Button

Convoy C8 / C8+ Remote Pressure Switch – Dual Button

Convoy C8 / C8+ Remote Pressure Switch – Dual Button

  • Brand:Dulotec
  • Product Code: ДИСТАНЦИОНЕН СПУСЪК
  • Availability: In Stock
  • 10.00 € / 19.56 лв.

    11.00 € / 21.51 лв.
  • 13 10 2026 03 11 2026
CONVOY • C8 / C8+ • D-02-04-381
Convoy C8 / C8+ Remote Pressure SwitchDual-Button Wired Flashlight Control

The Convoy C8 / C8+ remote pressure switch is a practical accessory that allows a compatible flashlight to be operated through a separate wired control. It is particularly useful when the flashlight is mounted on a bracket or other equipment and its original tail switch is difficult to reach.

Its two-button design provides both momentary illumination, active only while the button is pressed, and a click-operated constant-on function. The coiled cable makes it easier to position the control pad where it is most convenient.

Convoy C8 / C8+ Dual-Button Control Momentary Activation Constant-On Function Coiled Cable No Extra Batteries
C8 / C8+Compatible flashlight series
2 ButtonsTwo control functions
≈ 42 cmRetracted overall length
≈ 90 cmExtended overall length
Convenient Operation
Control your flashlight from a more accessible position

When a flashlight is attached to a mount or other equipment, accessing its original tail switch may be inconvenient. The remote switch relocates the controls to a position selected by the user without having to move the flashlight itself.

01
Instant Momentary Activation

Illumination is activated only while the corresponding button is held down. Releasing the button switches the flashlight off.

02
Click-Operated Constant-On

The second button works similarly to the flashlight's standard tail switch, allowing continuous illumination without holding the button.

03
Flexible Positioning

The coiled cable allows the control module to be positioned conveniently in relation to the flashlight.

Dual-Button Control
Two buttons – two different switching functions

The combination of momentary and constant-on activation makes the remote switch a convenient solution whenever immediate control over the light source is required.

MOM
Momentary Button

Press to illuminate. Release to switch off. Ideal for brief periods of lighting.

ON
Click Switch

Allows the flashlight to remain on without continuously pressing the button. Press again to change its switching state.

Coiled Cable
Practical length for different configurations
42–90 cm

Approximate overall length in the retracted and extended positions.

Compact Arrangement

When retracted, the coiled cable occupies less space and helps minimize unnecessary loose cable.

Extended Reach

The cable can be stretched when required to reach a more convenient control position.

Adaptable Setup

Suitable for configurations in which the flashlight and its operating switch need to be positioned separately.

Please note: the stated dimensions refer to the approximate overall length of the remote switch assembly, not just the straight portion of the cable.
Compatibility
Designed for Convoy C8 and Convoy C8+ flashlights

This remote pressure switch is designed for the Convoy C8 / C8+ series. Installation involves replacing the flashlight's standard tailcap with the remote switch tailcap.

C8
Convoy C8

Compatible with suitable Convoy C8 models featuring the corresponding tailcap design.

C8+
Convoy C8+

Suitable for Convoy C8+ models designed to accept this type of remote switch.

Before ordering: for modified or specialized flashlight versions, check the compatibility of the tailcap connection.
Installation and Operation
Simple setup in three steps
01 Switch Off the Flashlight

Make sure the flashlight is turned off before removing the original tailcap.

02 Install the Remote Switch

Remove the standard tailcap and screw the remote switch tailcap onto the compatible flashlight.

03 Test Both Buttons

Check momentary and constant-on operation, then position the cable to prevent tension or sharp bending.

Do not overtighten the tailcap. Keep the cable clear of moving parts and avoid prolonged excessive tension.
Technical Specifications
Convoy C8 / C8+ remote switch specifications
Product type
Wired remote flashlight pressure switch
Brand / compatible system
Convoy
Product reference
D-02-04-381
Compatible models
Convoy C8 and Convoy C8+
Control type
Wired, dual-button
Button 1
Momentary activation – on while pressed
Button 2
Click-operated constant-on function
Cable design
Extendable coiled cable
Overall length, retracted
Approximately 42 cm
Overall length, extended
Approximately 90 cm
Connection
Replacement flashlight tailcap
Intended use
Remote operation of compatible flashlights
Additional power supply
Not required
Colour
Black
Package Contents
What's included?
1 × Convoy C8 / C8+ Remote Pressure Switch

Wired dual-button switch assembly with a compatible flashlight tailcap.

Flashlight, battery, charger and mounting bracket are not included. These accessories are available separately.

Complete Your Equipment
Compatible flashlights and mounting accessories

Explore compatible Convoy C8+ flashlights and suitable magnetic mounting accessories to complete your lighting setup.

Practical Recommendations
Care and maintenance

Protect the cable from sharp edges, severe twisting and prolonged stretching. After use, inspect the tailcap contact surfaces and keep the switch clean and dry.

Before using your equipment, make sure the remote switch operates correctly and the cable is routed safely without obstructing other mechanisms.

FAQ • Convoy C8 / C8+
Frequently asked questions
Which flashlights is this remote switch designed for?

It is intended for compatible Convoy C8 and Convoy C8+ flashlight models.

What do the two buttons do?

One button provides momentary illumination while held down. The other provides click-operated constant-on illumination.

Can the flashlight remain continuously illuminated?

Yes. The click-operated button allows continuous illumination without holding it down.

How is the switch installed?

By replacing the compatible flashlight's standard tailcap with the remote switch tailcap.

How long is the cable?

The approximate overall assembly length is 42 cm retracted and 90 cm extended.

Does it require separate batteries?

No. It uses the power supply of the connected flashlight.

Is a Convoy C8 flashlight included?

No. This product includes only the wired remote switch assembly. The flashlight is sold separately.

Is it compatible with Convoy S2+ or L21B?

This version is intended for the C8/C8+ series. Other flashlight series require their corresponding compatible remote switches.

Ordering and Availability
Convoy C8 / C8+ remote pressure switch at MoskovHunt

The wired remote switch is available for online ordering, subject to current stock. For assistance choosing a compatible flashlight or mounting accessory, contact the MoskovHunt team.

Convoy C8 / C8+ – convenient flashlight control

Contact MoskovHunt for availability, compatibility, orders and Convoy flashlight accessories.

MoskovHunt • 37 Tsar Simeon Street, Levski 5900, Bulgaria 089 446 2621 – Viber/WhatsApp 089 681 1177 – Viber/WhatsApp gmoskov@mail.bg



Write a review

Note: HTML is not translated!
    Bad           Good
Captcha