DOG TRAINER Ultrasonic Dog Repeller – 4 Modes, LED, USB-C

DOG TRAINER Ultrasonic Dog Repeller – 4 Modes, LED, USB-C

DOG TRAINER Ultrasonic Dog Repeller – 4 Modes, LED, USB-C

  • Brand:Други
  • Product Code: DOG TRAINER® с LED Светлина и Вибрация – 4 Режима
  • Availability: In Stock
  • 37.84 € / 74.01 лв.


Buy with

48 installments of 1.41 € / 2.76 лв.

DOG TRAINER® ULTRASONIC DOG DETERRENT & TRAINER

DOG TRAINER Ultrasonic Dog Repeller with LED Light & Vibration 4 OPERATING MODES • 25–30 kHz • USB-C • UP TO 10 m RANGE

DOG TRAINER® is a compact rechargeable ultrasonic device designed as an additional aid for dog training and discouraging unwanted approaches by unfamiliar dogs. It combines three sound emitters, two ultrasonic frequency settings, an LED flashlight, a flashing-light mode and vibration feedback in a convenient handheld design.

The device can provide a short, contact-free ultrasonic signal in situations where a dog is approaching or displaying unwanted behaviour. It is also suitable as a supplementary training cue for a dog under the owner's control.

Four operating modes, a three-position side switch and a built-in lithium-ion battery make the device practical for walks, outdoor activities and everyday use. Its effectiveness varies between individual dogs and situations.

3 emitters 25 kHz fixed frequency 25–30 kHz variable Ultrasound + LED Vibration feedback Button lock USB Type-C 8-second automatic limit
4 modesIndependent functions
Up to 10 mIndicative operating range
1600 mAhRechargeable battery
130 gCompact handheld device

DOG TRAINER – several useful functions in one device

Unlike a basic audible signal device, DOG TRAINER offers a choice of audible sound, two ultrasonic frequency settings and LED light. These functions provide flexibility for controlled training with your own dog or for attempting to interrupt an unwanted approach by an unfamiliar animal.

Ultrasound is sound at a frequency above the usual upper limit of human hearing. This model operates at a fixed frequency of 25 kHz or a variable frequency between 25 and 30 kHz. Dogs may be able to hear these signals, although their sensitivity and reactions differ.

For everyday walks, the device can be carried charged, with the preferred frequency already selected. The side switch also has a locking position to help prevent accidental activation during storage.

Four operating modes

MODE 01 • SOUND
Audible sound signal

A short press produces an audible beep lasting approximately one second. Holding the button continues the sound while pressed. Suitable as an additional sound cue during supervised dog training.

MODE 02 • ULTRASONIC
Ultrasonic signal only

A short press activates ultrasound for approximately one second. Holding the button continues emission up to the automatic eight-second limit. The frequency is selected using the side switch.

MODE 03 • ULTRASONIC + FLASH
Ultrasound with flashing LED

Combines an ultrasonic signal with flashing light when the corresponding button is pressed. Provides an additional visual signal when appropriate for the situation.

MODE 04 • LED LIGHT
Steady or flashing flashlight

The LED has steady and flashing settings for evening walks and visibility. The light function can also be operated together with other device functions.

First-time setup – step-by-step instructions

01
Fully charge the battery

Connect the device to a suitable 5 V USB power source using USB Type-C. The charging indicator is red while charging and turns green when charging is complete. A full charge takes approximately 2.5 hours.

02
Unlock the side switch

Locate the three-position slider on the side of the housing. Select either ultrasonic frequency setting rather than the lock position. If the buttons do not respond, check the slider first.

03
Select an ultrasonic frequency

Choose 25 kHz for a fixed-frequency signal or 25–30 kHz for a variable-frequency signal. Both settings are selected using the same side switch.

04
Test the audible sound button

Briefly press the button marked with the sound symbol. You should hear a short beep and receive vibration feedback with a green operating indicator. This is a convenient initial check of the power and controls.

05
Check the LED flashlight

Press and hold the light button for approximately 1.5 seconds to activate steady illumination. Press again briefly to switch to flashing light. Another press switches the light off.

06
Lock the buttons for storage

Move the side slider to its marked lock position to reduce accidental activation in a bag or pocket. Before using the device again, select the preferred frequency.

Important: ultrasonic signals may be inaudible to humans. Not hearing a sound in ultrasonic mode does not necessarily mean the device is malfunctioning. Check the operation indicator and vibration feedback. Never test the emitters close to a person's or animal's ears.

How to use DOG TRAINER as a dog deterrent

An additional deterrent – personal safety always comes first

DOG TRAINER can produce a brief ultrasonic signal directed towards an approaching dog in an attempt to interrupt unwanted behaviour. The response depends on the individual animal, its hearing, level of arousal, distance and surroundings.

An ultrasonic signal cannot be relied upon to stop an attacking dog. A highly stressed or aggressive animal may ignore the signal, and an unexpected stimulus can sometimes make the situation worse.

The device should therefore be treated as a supplementary option, never as a substitute for keeping a safe distance, moving away calmly and using a physical barrier when needed.

Practical steps when an unfamiliar dog approaches
1. Stop and stay calm. Do not run towards or away from the dog, make sudden movements or attempt to approach it. Avoid challenging direct eye contact.
2. Maintain distance. If possible, place a fence, parked vehicle, bicycle, backpack or another suitable object between yourself and the dog. If cycling, dismount and use the bicycle as a barrier.
3. If it is safe, try one short signal. With the device already unlocked and ready, direct the emitter end towards the approaching dog and briefly activate the ultrasonic button. Never move closer just to test its effect.
4. Observe from a safe distance. If the dog hesitates or stops, use the opportunity to retreat calmly. Do not approach it or assume that it is no longer a threat.
5. If the signal has no effect, do not keep experimenting. Avoid standing in place trying different frequencies or repeated emissions while the dog gets closer. Prioritise a barrier and a safe route away.
6. In immediate danger, protect yourself. Keep a bag, jacket or another available object between yourself and the animal. Call for help and contact emergency services on 112 if there is a serious threat.
After dark: the ultrasound-and-flashing-light mode provides an additional visual signal. Only use it when appropriate and safe. Flashing light does not guarantee better deterrence and must not be used to provoke or chase an animal.

Which frequency should you choose – 25 kHz or 25–30 kHz?

Fixed 25 kHz frequency

Produces a steady-frequency ultrasonic signal. It may be selected as the initial setting for controlled use or for a brief deterrent attempt when conditions permit.

Variable 25–30 kHz frequency

Changes the ultrasonic frequency within the stated range. Offers an alternative type of signal, although it is not guaranteed to work better for every dog.

If carrying DOG TRAINER on walks, choose your preferred setting and check the battery before leaving home. In an actual threatening situation, the priority is safe withdrawal rather than testing different settings.

Buttons, vibration and status indicators

CONTROL • SHORT PRESS
Short button press

Activates an approximately one-second sound or ultrasonic signal. The combined mode adds flashing LED illumination.

CONTROL • PRESS & HOLD
Press and hold

Continues the selected signal while the button is pressed. Continuous ultrasonic emission is limited automatically after approximately eight seconds.

FEEDBACK • VIBRATION
Vibration in the hand

The housing vibrates to confirm activation of sound functions. The vibration is not transmitted to the dog.

STATUS • INDICATOR
Operating and battery lights

A green indicator confirms operation. A flashing red indicator warns of critically low battery charge; the device may then switch off.

USB-C charging and 1600 mAh battery

DOG TRAINER uses a built-in 1600 mAh lithium-ion battery. It charges through USB Type-C using a suitable 5 V USB power source. Approximate full charging time is 2.5 hours.

1
Connect the USB-C cable

Insert the connector into the charging port and connect it to an appropriate 5 V USB supply.

2
Watch the charging indicator

A steady red light indicates charging. The indicator turns green once charging has finished.

3
Check the device before use

Disconnect the cable, unlock the controls and briefly activate the audible sound mode to check the indicator and feedback.

Battery life varies by mode. The quoted runtime of up to 15 hours refers to audible sound operation, not continuous ultrasound with LED illumination.

Battery care: use a suitable 5 V USB power source. Keep the device away from water and excessive heat. Do not charge it if the charging port or housing is wet or damaged.

Indicative runtime by operating mode

OPERATING MODE / STATED APPROXIMATE BATTERY LIFE
Audible sound signal
Up to 15 hours
Ultrasound – fixed 25 kHz
Up to 1.5 hours
Ultrasound – variable 25–30 kHz
Up to 1.7 hours
25 kHz + flashing LED
Up to 1.3 hours
25–30 kHz + flashing LED
Up to 1.5 hours
Flashing LED only
Up to 6–7 hours

These values are indicative for the respective modes. Actual performance depends on battery condition, ambient temperature, duration of activation and the functions used.

Training your own dog – responsible use

With your own dog, DOG TRAINER may serve as an additional attention cue. It is not a substitute for clear commands, consistency, reward-based training and a trusting relationship between owner and animal.

Recommended approach
Start in a calm environment. Work only when the dog is comfortable and is not showing signs of fear, distress or aggressive behaviour.
Begin with a familiar verbal command. If useful, introduce a brief audible cue rather than starting immediately with ultrasound.
Reward the desired response. Use praise or an appropriate reward when the dog responds correctly.
Avoid prolonged or repeated exposure. Stop if the dog displays stress, fear, avoidance or increased agitation.
Seek professional guidance for serious behavioural issues. Anxiety, reactivity and aggression require an individual approach from a qualified trainer or veterinarian.

Do not use ultrasound as punishment for frightened, sick, highly stressed or very young dogs. Never direct the emitters close to an animal's ears.

Technical specifications – DOG TRAINER

PRODUCT AND OPERATING FUNCTIONS
Product designation
DOG TRAINER
Product type
Handheld ultrasonic dog deterrent and training aid
Main operating modes
4
Mode 1
Audible sound
Mode 2
Ultrasound
Mode 3
Ultrasound + flashing LED
Mode 4
Steady / flashing LED flashlight
Ultrasonic settings
Two frequency options
Fixed frequency
25 kHz
Variable frequency
25–30 kHz
EMITTERS AND RANGE
Sound / ultrasonic emitters
3
LED light source
1
Indicative operating range
Up to 8–10 metres
Short activation
Approximately 1 second
Continuous ultrasonic emission
Up to 8 seconds per activation
Automatic emission limit
Approximately 8 seconds
Vibration feedback
Yes, in device housing
Button lock
Yes, side selector
BATTERY AND CHARGING
Battery type
Built-in lithium-ion
Capacity
1600 mAh
Charging interface
USB Type-C
Power input
5 V USB
Approximate charging time
2.5 hours
Charging indicator
Red
Fully charged indicator
Green
Low battery warning
Flashing red
DIMENSIONS AND CONSTRUCTION
Dimensions
125 × 55 × 42 mm
Weight
Approx. 130 g
Controls
Dedicated buttons and three-position side switch
Operation
Handheld, without physical contact with the animal
Water-resistance rating
No verified IP rating for this exact model

Troubleshooting – what to check if it does not work

The buttons do not respond

Check whether the side selector is in the lock position. If the problem remains, charge the battery and test the audible sound button.

The indicator flashes red

The battery is almost depleted. Connect the device to a suitable 5 V USB-C power source and charge it fully.

No sound is audible in ultrasound mode

This may be normal. Frequencies of 25–30 kHz are above the usual human hearing range. Check the indicator and vibration feedback.

The dog does not react

Responses vary with the animal's hearing, distance, arousal, surrounding obstacles and individual behaviour. Lack of response does not by itself indicate a malfunction.

Important safety guidance

DOG TRAINER does not provide guaranteed protection against a dog attack. It is a supplementary sound-emitting device. In immediate danger, distance, calm withdrawal, an available barrier and seeking help are the primary safety measures.

Do not use the device to deliberately frighten, repeatedly distress, chase or provoke animals. Never direct the emitters at close range towards the ears of people or animals.

Other nearby animals may also detect the ultrasonic signal. Avoid unnecessary use around puppies, sensitive pets and animals with health or behavioural difficulties.

Do not allow young children to use the device unsupervised. Protect it from water immersion, heavy rain, mechanical damage and excessive heat.

Frequently asked questions – DOG TRAINER

Can DOG TRAINER be used as an ultrasonic dog repeller?
Yes. Its ultrasonic functions can be used in an attempt to discourage an unwanted approach. Responses vary and stopping an aggressive dog is not guaranteed.
Which mode should I use if an aggressive dog approaches?
If safe, you may try one short ultrasonic signal from a distance. Remaining calm, keeping a barrier between you and the dog and withdrawing safely take priority.
How do I select 25 kHz or 25–30 kHz?
Use the three-position side switch to choose fixed frequency, variable frequency or button lock.
Is the effect guaranteed at 10 metres?
No. The stated 8–10 metres is an indicative operating range, not a guaranteed deterrence distance.
Why can I not hear the ultrasound?
25–30 kHz is normally above the human hearing range. Use the indicator and vibration feedback to check activation.
What does the vibration mean?
It confirms activation of the sound function. The handheld device vibrates; vibration is not delivered remotely to the dog.
How do I switch on the LED flashlight?
Hold the light button for approximately 1.5 seconds for steady illumination. Press again for flashing mode and once more to switch it off.
Can LED light and ultrasound work together?
Yes. A dedicated ultrasound-and-flashing-light mode is available, and the LED function can also be used alongside other modes.
Why does ultrasound stop after eight seconds?
The device has an automatic emission limit of approximately eight seconds to reduce prolonged activation.
How do I lock the buttons?
Move the side switch into the marked lock position. Select either frequency setting before using the device again.
How long does charging take?
Approximately 2.5 hours through USB-C with a suitable 5 V power source. The charging indicator is red and turns green when complete.
Does the battery last 15 hours in every mode?
No. Up to 15 hours applies to the audible sound mode. Continuous ultrasonic and combined modes have significantly shorter stated runtimes.
Can I use it to train my own dog?
It may serve as an additional cue during controlled training. Clear commands, consistency and positive reinforcement should remain the foundation of training.
Is DOG TRAINER waterproof?
No verified IP rating is available for this exact model. Do not immerse it in water or expose it to heavy rain.

Discover more outdoor accessories

Explore additional compact devices and practical accessories for outdoor activities in the MoskovHunt catalogue.

MORE FROM MOSKOVHUNT Discover other practical outdoor accessories
DOG TRAINER • Practical functions for everyday walks

Contact MoskovHunt for information about DOG TRAINER availability, operating modes, battery charging, setup and responsible use as an ultrasonic dog deterrent.

089 446 2621 • Viber / WhatsApp
089 681 1177 • Viber / WhatsApp
MoskovHunt • 37 Tsar Simeon Street, Levski 5900, Bulgaria



Write a review

Note: HTML is not translated!
    Bad           Good
Captcha