Fast acquisition
Minimum magnification and the wide field of view support quicker orientation and tracking in a dynamic hunting situation.
A compact hunting riflescope for driven hunts and fast situations at short range. The 1–4× magnification, field of view of up to 33.5 m at 100 m and illuminated German #4 reticle support fast target acquisition, while the 30 mm tube, SMC coatings and dry-nitrogen filling provide a practical field-ready construction.
FOMEI BEATER II OY6271 is designed for situations where rapid orientation and a wide visible area matter more than high magnification. At 1×, the field of view is 33.5 m at 100 m; at 4× it remains 8.7 m. This gives the scope a practical range from fast close-distance use to more precise aiming with moderate magnification.
Minimum magnification and the wide field of view support quicker orientation and tracking in a dynamic hunting situation.
The 4× maximum provides a clearer view of detail while retaining the compact character expected from a driven-hunt scope.
The 241 mm length and 442 g weight support balanced positioning on a suitable mounting system.
The G4 reticle uses clearly defined heavy side and lower posts with a finer central area. Its apparent size remains unchanged as magnification is adjusted because the reticle is positioned in the second focal plane.
Multi-layer anti-reflection coatings reduce unwanted reflections and support light transmission and image contrast.
The tube is filled with dry nitrogen to reduce the risk of internal fogging during sudden temperature changes.
Dioptre compensation allows the reticle image to be focused more precisely for the individual user.
The body is made from aluminium alloy, while the 30 mm centre tube uses a widely supported mounting standard. FOMEI states that BEATER II riflescopes are tested with .375 H&H Magnum recoil, equivalent to approximately 6000 J. Eye relief is 86 mm.
30 mm scope rings are required. Their design and height depend on the specific base and firearm configuration.
The manufacturer states testing equivalent to the recoil of .375 H&H Magnum for the BEATER II riflescope series.
The 241 mm length and 442 g weight should be considered when selecting the mounting position and ring height.
Correct installation requires 30 mm rings matched to the specific base and required mounting height. If compatibility is uncertain, send MoskovHunt the exact base model or a clear photo before submitting an enquiry.
Contact MoskovHunt or visit the shop for current availability, confirmation of the exact configuration and help selecting suitable 30 mm mounting rings.
When the option is active, the product may be purchased on instalments through TBI Bank, subject to current terms, available partner programmes and individual approval. The term, monthly payment and total amount payable are determined for the specific application.
German #4 / G4 with an illuminated red centre dot. The reticle is positioned in the second focal plane.
No. On the exact OY6271 model, parallax is factory-set at 100 m and there is no side adjustment.
The scope requires 30 mm rings. Their exact design and height depend on the base and firearm configuration.
The field of view is 33.5 m at 100 m on 1× and 8.7 m at 100 m on 4×.
The illuminated red dot has 6 brightness levels — 3 for daylight and 3 for lower-light conditions. Intermediate “0” positions allow quick switching off and return to the preferred level.
FOMEI states testing of the BEATER II series with .375 H&H Magnum, equivalent to approximately 6000 J.
When the option is active, an application for TBI Bank instalment financing may be submitted. Terms and approval are individual.
Contact MoskovHunt for current availability, help selecting suitable 30 mm rings, base compatibility and TBI Bank instalment options.
| Характеристика | |
| Дължина | 241 мм |
| Захранване | батерии тип CR2032 - 1бр |
| Монтажен диаметър | 30мм |
| Обектив | 24 mm |
| Увеличение | 1-4 |
| Тегло | 442 гр. |