HQS Hunter Suppressor 7.62 (.30) – Over-Barrel Design, 37+ dB, Interchangeable Thread Sleeves
HQS Hunter Suppressor 7.62 (.30) – Over-Barrel Design, 37+ dB, Interchangeable Thread Sleeves
- Brand:HQS Team
- Product Code: Hunter кал. 7.62 (.30) – Over-Barrel дизайн, сменяеми втулки
- Availability: In Stock
360.00 € / 704.10 лв.
379.00 € / 741.26 лв.15 11 2026 29 11 2026
Available Options
The HQS Hunter is a Bulgarian-made suppressor featuring a partially over-the-barrel (reflex) configuration. The standard version incorporates a one-piece internal core with a nickel-plated protective finish on its internal components.
Developed by HQS Team in Karlovo, Bulgaria, the Hunter is the original model in the Hunter family. Published manufacturer specifications include 37+ dB sound reduction, 250 mm overall length, 54 mm diameter and 497 g weight.
In an over-barrel configuration, part of the housing extends rearward around the barrel. As a result, although the suppressor measures 250 mm overall, it extends only 154 mm forward of the muzzle. It is designed for use with compatible hunting firearms, subject to all applicable legal requirements.
The internal core is manufactured as a single component, while nickel plating is intended to support corrosion resistance on the internal surfaces. Compatibility depends not only on nominal calibre but also on the specific firearm, its configuration and all relevant factory restrictions.
A configuration in which overall length and the additional length in front of the muzzle are different measurements.
A factory internal construction with an emphasis on resistance to vibration and wear.
A surface treatment associated with corrosion resistance and long-term maintenance.
The sound-reduction figure published by HQS. Actual results vary with the test conditions and equipment configuration.
X-Foam is a specialised porous metallic material used by HQS in its separate factory Hunter X and Hunter XS versions. HQS specifies 37+ dB and 497 g for the standard Hunter, compared with 42+ dB and 577 g for the Hunter X.
A European HQS representative has published information about X-Foam elements previously being offered separately for existing Hunter and Slim products. That information alone does not confirm current availability, compatibility with a particular serial number, or that a modified unit would achieve 42+ dB.
| Model | Published specifications |
|---|---|
| HQS Hunter | 37+ dB · 497 g · 250 mm |
| HQS Hunter X | 42+ dB · 577 g · 250 mm |
| HQS Hunter XS | 37+ dB · 470 g · 199 mm |
| Parameter | Specification |
|---|---|
| Brand | HQS / High Quality Suppressors |
| Manufactured in | Karlovo, Bulgaria |
| Series / model | Hunter · standard version |
| Nominal maximum calibre for this version | 7.62 mm / .30 |
| Design | Over-Barrel / reflex |
| Overall length | 250 mm |
| Length added beyond the muzzle | 154 mm |
| Diameter | 54 mm |
| Weight | 497 g |
| Published sound reduction | 37+ dB |
| Published recoil reduction | Up to 50%, according to HQS |
| Internal construction | One-piece core |
| Protective treatment | Nickel-plated internal components |
| Compatibility | Subject to confirmed suitability for the specific firearm and factory configuration |
| Measurement standard | MIL-STD-1474E, referenced in current HQS material |
| Published test configuration | .308 Win · 510 mm barrel · 150 gr |
| X-Foam mesh material | Not a standard Hunter feature; used in the X / XS versions |
Decibels are a logarithmic unit. The published reduction describes a difference in measured sound pressure under specified test conditions, not an unchanging result with every firearm and cartridge. HQS publishes a MIL-STD-1474E test methodology with a Larson Davis Spartan 821IH-QPR instrument and a test configuration involving .308 Win, a 510 mm barrel and a 150 gr projectile.
Both videos from the previous product listing have been retained. They were published by independent third parties, not through an official HQS manufacturer channel.
Demonstration videos do not replace laboratory measurements for a specific equipment configuration.
The suppressor must be used only where legally permitted and after compatibility has been confirmed. An unsuitable configuration, damage, overheating or unauthorised alterations may create serious risks. Any uncertainty about technical condition requires assessment by a competent specialist.
This product is not sold online. Purchase is carried out exclusively at the MoskovHunt physical store, in full compliance with all applicable legal requirements.
No. The standard Hunter has published figures of 37+ dB and 497 g; the factory Hunter X has 42+ dB and 577 g.
Part of the housing extends rearward around the barrel, so the length added beyond the muzzle is shorter than the product's overall length.
A porous metallic material used in the factory Hunter X and Hunter XS variants.
No. A specific factory configuration and verified measurement are required to substantiate such a rating.
Not automatically. Compatibility depends on all manufacturer restrictions and the specific firearm configuration.
No. Sound reduction alone should not be assumed to bring noise exposure down to safe levels.













