KJI K700 KJ85007 Shooting Tripod Kit with Reaper Hellbound Grip

KJI K700 KJ85007 Shooting Tripod Kit with Reaper Hellbound Grip

KJI K700 KJ85007 Shooting Tripod Kit with Reaper Hellbound Grip

  • Brand: KJI USA
  • Product Code: K700 AMT със захват Hellbound Grip - алуминий
  • Availability: In Stock
  • 272.00 € / 531.99 лв.

    306.00 € / 598.48 лв.
  • 28 07 2026 18 08 2026

Buy with

13 x €25.51 (13 x 49.89 BGN)

Two products in one kit • KJ85007 + EU-KJ86009
KJI K700 Tripod Kit with Reaper Hellbound Grip aluminum shooting tripod with a locking firearm clamp

A complete shooting system combining the current four-section KJI K700 KJ85007 aluminum tripod with the Reaper Hellbound EU-KJ86009 mechanical firearm clamp. MoskovHunt offers the two individual products as one kit for stable shooting from standing, kneeling, seated or low-level positions.

68 kg Load capacity
89–1429 mm Working height
0–73 mm Clamp range
360° Horizontal rotation
4 sections Tripod legs
≈2.59 kg Tripod and clamp
Stability from the ground to the firearm

KJI K700 with Reaper Hellbound Grip combines two separate components into a complete, ready-to-use shooting platform. The K700 provides a rigid and adjustable base on different surfaces, while the Hellbound secures the rifle fore-end or chassis with a mechanical clamp offering a working range of 0 to 73 mm.

Unlike systems requiring a pre-installed Picatinny or Arca-Swiss rail, the Reaper Hellbound can hold a compatible firearm directly between its protected jaws. This allows the kit to be used with different rifles and shooting configurations when the shape and width of the fore-end permit secure and even clamping.

Component 1 • KJ85007
KJI K700 Tripod

Four-section aluminum tripod with CNC-machined twist locks, three independent leg angles and a load capacity of up to 68 kg.

+
Component 2 • EU-KJ86009
Reaper Hellbound Grip

Mechanical firearm clamp with a 0–73 mm range, smooth 360° rotation and a wide vertical movement range.

Why does the kit work as a complete system?
01 Platform
Maximum load capacity of 68 kg

The aluminum K700 is designed to support loads of up to 68 kg. This provides substantial reserve capacity for a rifle, riflescope, thermal or digital sight, rangefinder and other compatible components in the shooting configuration.

02 Clamp
Secure holding without a mandatory rail

The Reaper Hellbound holds a compatible fore-end or chassis between two protected contact surfaces. The firearm therefore does not necessarily require a Picatinny or Arca-Swiss mounting interface underneath.

03 Extension
Four sections with twist locks

Each leg has four aluminum sections and CNC-machined twist locks. The construction allows fast length adjustment, compact transport and secure positioning when the locks are correctly tightened.

04 Aiming movement
360° pan and 111° vertical range

The Hellbound provides smooth 360° horizontal rotation, movement of up to 22° upward and up to 87° downward. The shooter can change direction and elevation without constantly repositioning the tripod legs.

05 Terrain
Three independent leg angles

The legs can be positioned at 23°, 55° or 83°. Independent adjustment helps level the tripod on slopes, uneven ground, rocks, vegetation and support points of different heights.

06 Transport
Folded length of 511 mm

When folded, the K700 measures approximately 511 mm and weighs about 1.8 kg. The included carrying case makes transport easier, while the separate factory packaging of the Hellbound protects the clamp before the kit is assembled.

K700 KJ85007 • Aluminum Tripod
KJI K700 – the current four-section base

The K700 KJ85007 is made from hard-anodized aluminum and combines relatively low weight with a high load capacity. The four sections of each leg use twist locks for smooth extension and stable positioning.

Maximum height with the legs in their first position is 1429 mm. When fully spread to 83°, the tripod can be lowered to approximately 89 mm, supporting low shooting positions close to the ground.

The upper mounting interface uses a 3/8″-16 thread and is compatible with the Reaper Hellbound. Rubber feet are suitable for hard surfaces, while the included interchangeable spikes provide better grip on soil, grass and other soft terrain.

1429 mm Maximum height
89 mm Minimum height
511 mm Folded length
1.8 kg Tripod weight
Reaper Hellbound – secure clamping and smooth movement

The Reaper Hellbound is a mechanical shooting clamp with a straightforward and durable construction. Its adjustable jaws open from 0 to 73 mm, allowing use with a variety of compatible rifle fore-ends and chassis systems.

The offset handle is positioned to the side for easy access during tightening and release. The design leaves more free space underneath the firearm and may improve access to the magazine on compatible models.

A separate resistance-adjustment knob allows movement to be tuned according to firearm weight, shooter preference and the specific shooting situation.

0–73 mm Working range
360° Horizontal movement
22° / 87° Upward / downward
≈790 g Weight
203 mm Main length
3/8″-16 Main mounting thread
Three leg angles for different shooting positions
23°
Maximum height

The standard position for a taller configuration and shooting from standing or kneeling positions. Maximum height reaches 1429 mm.

55°
Wide and lower base

The intermediate position widens the stance and increases stability when a lower working height is required or the terrain is uneven.

83°
Position close to the ground

Fully spread legs allow the tripod to reach approximately 89 mm for low shooting positions and work close to ground level.

What applications is the kit suitable for?

The KJI K700 with Reaper Hellbound is intended for shooters and hunters who require an adjustable support and direct mechanical clamping of the firearm without a mandatory underside rail.

Hunting from a waiting position

The clamp supports the firearm and reduces the need for the shooter to carry its full weight for extended periods.

Shooting on uneven terrain

Independently adjustable legs and three leg angles allow the setup to adapt to slopes, vegetation and support points at different heights.

Shooting-range training

Suitable for practising tripod-supported shooting, smooth tracking and transitions between different directions.

Precision shooting

The stable platform helps build a repeatable shooting position and provides better control over firearm alignment.

Thermal and digital configurations

The high load capacity supports rifles fitted with suitable sights, rangefinders and additional equipment.

Different fore-ends and chassis systems

The 0–73 mm range supports a wide selection of compatible shapes and widths.

KJI system video presentations

The videos demonstrate the practical operation of the K700 platform and the separate controls of the Reaper Hellbound locking clamp.

KJI K700 – tripod demonstration with a Reaper system
Reaper Hellbound – locking clamp presentation
The firearm and additional equipment shown in the videos are not included in the kit.
Technical specifications
MoskovHunt retail kit
Manufacturer KJI Precision / Sellmark Corporation
Product KJI K700 Tripod + Reaper Hellbound Grip Kit
Component 1 K700 Tripod, model KJ85007
Component 2 Reaper Hellbound Grip, model EU-KJ86009
Configuration Two separate products offered together as one kit
Approximate combined weight Approximately 2.59 kg without firearm or additional devices
Connection between components 3/8″-16 interface
Online purchase Yes
Instalment purchase Yes – through TBI Bank, subject to terms and individual approval
KJI K700 Tripod – KJ85007
Type Four-section aluminum tripod
Model KJ85007
Maximum load capacity 68 kg / 150 lb
Maximum height 1429 mm / 56.3″
Minimum height 89 mm / 3.5″ with the legs positioned at 83°
Folded length 511 mm / 20.1″
Folded diameter Approximately 88 mm / 3.5″
Weight 1.8 kg / 3.9 lb
Leg sections 4
Section diameters 30 / 26 / 22 / 18 mm
Leg angles 23°, 55° and 83°
Lock type CNC-machined twist locks
Upper mounting interface 3/8″-16
Upper platform diameter 46 mm / 1.81″
Material Hard-anodized aluminum
Feet Interchangeable rubber feet and metal spikes
KJI Reaper Hellbound Grip – EU-KJ86009
Type Adjustable locking firearm clamp
Model EU-KJ86009
Dimensions Approximately 203 × 203 × 152 mm
Clamp working range 0–73 mm
Horizontal rotation 360°
Upward vertical movement Up to 22°
Downward vertical movement Up to 87°
Total vertical range 111°
Main tripod mounting thread 3/8″-16
Marking on factory packaging 3/8″-16 and 1/4″-20
Material 6061 aluminum and polymer components
Weight Approximately 780–790 g
Controls Offset handle and resistance-adjustment knob
What is included in the kit?
  • KJI K700 Tripod KJ85007
  • KJI Reaper Hellbound Grip EU-KJ86009
  • Tripod carrying case
  • Three interchangeable metal leg spikes
  • 3 mm hex key
  • 5 mm hex key
  • Pre-installed rubber feet
  • Two separate factory product packages
Instalment purchase through TBI Bank

The product may be purchased in instalments through TBI Bank in accordance with the current terms, available partner programmes and individual approval. Contact MoskovHunt for the applicable monthly instalment, repayment period and required documents.

Frequently asked questions
Is this one factory product or a kit made from two products?

This is a MoskovHunt retail kit consisting of two individual products: the KJI K700 KJ85007 and the Reaper Hellbound EU-KJ86009. They are supplied in their separate factory packages and are used together as one shooting system.

Is a Picatinny or Arca-Swiss rail required on the firearm?

It is not mandatory. The Reaper Hellbound directly clamps a compatible fore-end or chassis. Its shape and width must allow secure and even positioning between the jaws.

What width can the Reaper Hellbound accommodate?

Its working range is 0 to 73 mm. Before use, confirm that the specific fore-end or chassis can be secured without instability or contact with sensitive components.

Can the firearm move while it is clamped?

Yes. The clamp permits 360° horizontal rotation, movement of up to 22° upward and up to 87° downward. Movement resistance can also be adjusted.

What are the maximum and minimum heights of the K700?

Maximum height is 1429 mm. With the legs fully spread to 83°, the tripod can be lowered to approximately 89 mm.

Is the kit suitable for a rifle fitted with a thermal sight?

The high load capacity of the K700 supports heavy shooting configurations. Always check total weight, balance, correct clamping and the safe positioning of the exact firearm and devices.

Can the kit be ordered online?

Yes. The product can be ordered online from MoskovHunt when available, or purchased directly from the retail premises.

KJI K700 with Reaper Hellbound Kit from MoskovHunt

You receive both principal system components in one complete kit: the stable K700 aluminum tripod and the Reaper Hellbound locking clamp. Contact the MoskovHunt team for current availability, delivery, compatibility with a specific fore-end or instalment purchase terms.

Current availability
Delivery in Bulgaria
Compatibility check
TBI Bank instalments

MoskovHunt • 37 Tsar Simeon Street, 5900 Levski, Bulgaria

089 446 2621  – Viber/WhatsApp 089 681 1177  – Viber/WhatsApp gmoskov@mail.bg



Write a review

Note: HTML is not translated!
    Bad           Good
Captcha