Sightmark Mini Shot A-Spec M3 SM26049 Red Dot – 3 MOA
Sightmark Mini Shot A-Spec M3 SM26049 Red Dot – 3 MOA
- Brand:Sightmark
- Product Code: Mini Shot A-Spec M3, червена точка
- Availability: In Stock
124.00 € / 242.52 лв.
137.54 € / 269.00 лв.09 10 2026 31 10 2026
Sightmark Mini Shot A-Spec M3 SM26049 is an ultra-compact micro reflex sight with a 3 MOA red dot, designed for configurations where low weight, compact dimensions and automatic brightness control are key priorities.
The model uses a Shield RMS-C footprint, a durable 6061-T6 aluminium housing and an automatic light sensor that adjusts the intensity of the red dot according to ambient light. The sight itself weighs only 20 g and offers battery life of up to 100,000 hours depending on operating conditions.
The Mini Shot A-Spec M3 is one of the most compact formats in the Mini Shot family. With body dimensions of only 40.8 × 23 × 22.8 mm and a weight of 20 g without the mount, it adds very little bulk to the overall setup.
The sight itself weighs approximately 20 g, helping minimise additional mass on the platform.
The optical system uses 1× magnification and does not enlarge the image, preserving a natural view through the window.
The optical window measures 20 × 16 mm, appropriate for a micro reflex sight with minimal overall dimensions.
A compact red dot that remains easy to recognise without covering too much of the viewing window.
MOA is an angular unit of measurement. A 3 MOA dot remains relatively fine in apparent size, providing a practical balance between quick visual recognition and a clear view through the optic.
It is a versatile dot size used by Sightmark specifically on the compact A-Spec M3.
Unlike some other models in the Mini Shot A-Spec family, the M3 does not use conventional manual brightness levels. An integrated light sensor monitors ambient conditions and automatically selects the appropriate LED intensity.
Brightness changes automatically according to the surrounding light, without the need to manually cycle through preset levels.
The built-in sensor controls the red dot intensity according to available ambient light.
Sightmark specifies an operating range of approximately 500 to 100,000 hours from one CR2032 battery. Actual battery life depends on ambient light and therefore on the automatically selected dot intensity.
The sight uses a standard 3 V CR2032 battery, which is widely available and easy to replace.
Depending on lighting conditions, operating time may begin at approximately 500 hours.
Under low-consumption conditions, the manufacturer specifies maximum battery life of up to 100,000 hours.
The Mini Shot A-Spec M3 uses a Shield RMS-C footprint. This is a specific mounting standard and should not be confused with Trijicon RMR, Docter/Noblex or other footprint systems.
The sight can be mounted directly on compatible optics-ready platforms using the Shield RMS-C interface.
Sightmark includes a low-profile mount for compatible Weaver/Picatinny rails in the standard configuration.
The compact height of the A-Spec M3 allows the optical dot, in compatible configurations, to be used together with standard mechanical sights – known as co-witness.
Co-witness means the mechanical sights remain visible through the red-dot window. Actual alignment depends on the specific platform and mounting system used.
The housing is made from 6061-T6 aluminium – a heat-treated aluminium alloy widely used where a combination of low weight and good mechanical strength is required.
The rigid body protects the electronics and optical module without adding unnecessary weight.
The construction allows the sight itself to weigh only 20 g without the mounting base.
The matte black finish maintains the discreet and functional character of the compact optic.
Sightmark specifies IP55 protection for the Mini Shot A-Spec M3. This provides protection against dust ingress at a level that does not interfere with normal operation and protection against water jets.
The housing is designed for use in changing outdoor conditions and for incidental exposure to moisture.
The manufacturer specifies impact resistance tested with an approximately 0.9 m drop.
The optical window uses an AR Red anti-reflective coating, designed to reduce unwanted reflections and support a cleaner view through the compact window.
The coating supports visual contrast and helps reduce part of the unwanted glare on the optical surface.
The sight does not require a fixed eye distance like a conventional magnified riflescope.
The manufacturer specifies parallax from 25 yd to infinity.
The Mini Shot A-Spec M3 provides a substantial internal adjustment range for aligning the dot with the specific mounting configuration.
The manufacturer specifies an operating temperature range of −30°C to +50°C, allowing use across a broad range of seasonal conditions.
- Brand
- Sightmark
- Series
- Mini Shot A-Spec
- Model
- M3 Micro Reflex
- Product code
- SM26049
- Type
- Open micro reflex red dot sight
- Magnification
- 1×
- Dot size
- 3 MOA
- Dot colour
- Red
- Brightness control
- Automatic
- Optical window size
- 20 × 16 mm
- Eye relief
- Unlimited
- Parallax
- 25 yd – ∞
- Elevation range
- 80 MOA
- Windage range
- 130 MOA
- Adjustment type
- Continuous, without fixed clicks
- Housing
- 6061-T6 aluminium
- Colour
- Matte black
- Optical coating
- AR Red
- Footprint
- Shield RMS-C
- Included mount
- Low-profile Weaver/Picatinny mount
- Protection
- IP55
- Shock resistance
- Yes, tested with approximately 0.9 m drop
- Nitrogen filled
- No
- Fogproof
- Not specified as fogproof
- Battery
- 1 × CR2032, 3 V
- Battery life
- Approximately 500–100,000 hours depending on conditions
- Operating temperature
- −30°C to +50°C
- Dimensions without mount
- 40.8 × 23 × 22.8 mm
- Weight without mount
- 20 g
- Weight with low mount
- 46 g
Original Sightmark Mini Shot A-Spec M3 Micro Reflex SM26049 with 3 MOA red dot.
Included mount for compatible Weaver/Picatinny rails.
Sightmark specifies a protective rubber cover and battery as part of the standard package.
Different models within the Mini Shot family use different mounting standards. The exact A-Spec M3 SM26049 uses the Shield RMS-C footprint, which is an important compatibility detail.
Uses a Docter/Noblex/Burris-type footprint and is a different model.
Uses the Trijicon RMR footprint and should not be assumed to be directly compatible with the M3.
The exact SM26049 uses the Shield RMS-C footprint and automatic brightness control.
Clean the optical window with a clean microfiber cloth and a product intended for optical surfaces. Do not use abrasive materials or aggressive household cleaners.
Keep the area around the automatic light sensor clean so the system can correctly read ambient light conditions.
This is the Sightmark Mini Shot A-Spec M3 Micro Reflex, product code SM26049.
The aiming dot is 3 MOA.
No. The A-Spec M3 uses automatic brightness control through an integrated light sensor.
The exact SM26049 uses the Shield RMS-C footprint.
Yes. The standard package includes a low-profile mount for Weaver/Picatinny rails.
The sight itself weighs approximately 20 g, or about 46 g with the low mount.
It uses one CR2032 battery.
The manufacturer specifies approximately 500 to 100,000 hours, depending on light conditions and power consumption.
The model is rated IP55.
No. The M3 uses continuous adjustments without a fixed MOA click value.
Elevation range is 80 MOA, while windage range is 130 MOA.
Yes, subject to current availability at MoskovHunt.
For current availability, compatibility with a specific mounting interface and additional information about the Sightmark Mini Shot A-Spec M3, contact MoskovHunt.

-1000x920.jpg)
-1000x920.jpg)
-1000x920.jpg)
-1000x920.jpg)
-1000x920.jpg)
-1000x920.jpg)





