HQS Special Impact 7.62 (.30) Suppressor – 42+ dB
HQS Special Impact 7.62 (.30) Suppressor – 42+ dB
- Brand:HQS Team
- Product Code: Special Impact кал. 7.62 мм (.30), сменяема втора камера
- Availability: In Stock
460.00 € / 899.68 лв.
486.00 € / 950.53 лв.15 11 2026 29 11 2026
Available Options
The distinctive dual-chamber suppressor from Bulgarian manufacturer HQS. Special Impact combines a reflex Over-Barrel construction, generous internal volume and a specialised gas-flow management system. The design focuses on hunting calibres, acoustic comfort and professional long-term servicing.
In this configuration for calibres up to 7.62 mm (.30), the published specifications include 42+ dB sound-pressure reduction, an overall length of 302 mm, forward extension of 206 mm, a body with 54/50 mm diameters and a weight of approximately 600 g.
Special Impact brings together two developments from HQS: the dual-chamber concept associated with the Special series and the construction principles applied to the Impact model. Their combination creates a separate product featuring an extended housing, a distinctive central connection between sections and a published acoustic rating of 42+ dB.
The design incorporates two functionally distinct chambers, controlled gas expansion and a front section intended for professional replacement.
The reflex construction extends rearward over part of the barrel. Although the overall length is 302 mm, only 206 mm extend beyond the muzzle. The difference between these published dimensions gives an approximate 96 mm rearward reflex section.
Two acoustic sections arranged within a design characteristic of the Special Impact range.
A published rating for the complete factory product, measured under the applicable test methodology.
With a 302 mm overall length, the unit adds 206 mm beyond the muzzle while the remaining portion surrounds the barrel rearward.
A separate structural chamber designed for replacement through the appropriate professional servicing process.
Two characteristic section diameters give Special Impact its recognisable exterior design.
The design contributes to more comfortable firearm behaviour. The actual result depends on the entire equipment configuration.
Developed and manufactured by the Bulgarian HQS team and the Bamex-98 industrial group.
Special Impact has its own dual-chamber technology and should not be confused with Hunter X or Hunter XS.
The first functional section accommodates the initial expansion of propellant gases. The design employs an intermediate pressure-relief arrangement that supports the operation of the following acoustic section.
The front section is designed as a replaceable component within the manufacturer's professional servicing concept. This differs from replacing an entire suppressor and allows maintenance requirements to be assessed by a qualified specialist.
Special Impact features characteristic openings in the intermediate section. They are functional elements of the design and must not be obstructed by a neoprene cover or any other wrapping.
The angled view shows the two external sections, matte black surface and distinctive silhouette. This is a different construction from HQS Hunter X, despite both models having a published sound-reduction rating of 42+ dB.
The published dimensions of Special Impact are 302 mm overall / 206 mm beyond the muzzle / approximately 96 mm extending rearward around the barrel.
These three HQS products demonstrate different technical approaches. Even when two models share the same published sound-reduction rating, their design and physical dimensions may differ considerably.
| Specification | Model details |
|---|---|
| Brand | HQS · High Quality Suppressors |
| Model | Special Impact |
| Manufacturer | HQS Team / Bamex-98, Bulgaria |
| Calibre configuration | Up to 7.62 mm / .30 – version on this product page |
| Construction | Reflex, Over-Barrel |
| Acoustic system | Special Impact dual-chamber concept |
| Overall length | 302 mm |
| Forward extension | 206 mm |
| Rearward reflex section | Approx. 96 mm (302 – 206 mm) |
| Housing diameters | 54 mm / 50 mm – two sections |
| Weight | Approx. 600 g for the published configuration |
| Published sound reduction | 42+ dB |
| Test methodology | MIL-STD-1474D, identified in the existing product information |
| Main design feature | Replaceable front acoustic chamber through professional servicing |
| Intermediate section | Functional pressure-relief openings; must remain unobstructed |
| Internal components | Specialised metallic core; factory-engineered dual-chamber structure |
| External finish | Matte black |
| Mounting | According to the adapter and thread configuration of the specific unit |
| Thread variants within the range | M13×1, M14×1, M14×1 LH, M15×1, M16×1, M17×1, M18×1, 1/2-20, 1/2-28, 5/8-24 |
| Permitted barrel diameter in the overlapping area | Up to 22 mm, according to the published restriction for this model |
| Package contents | According to the exact factory configuration of the supplied item |
| Country of origin | Bulgaria |
| Purchasing conditions | At the physical store only, subject to applicable law |
This page presents the up to 7.62 mm (.30) calibre configuration. HQS offers separate adapter and thread variants, but the exact thread depends on the individual supplied unit and cannot be established from the .30 designation alone.
The reflex section must be compatible with the barrel profile. The previous specification lists a maximum diameter of 22 mm in the overlapping barrel area. A qualified specialist must establish the compatibility of the calibre, cartridge, mounting thread and alignment for the individual firearm.
Sound-pressure reduction under specific test conditions, not the final absolute sound level.
The published 42+ dB refers to a difference in measured sound pressure under specified test conditions. It should not be interpreted as a guaranteed sound level for every firearm and cartridge combination.
Actual results depend on calibre, ammunition, barrel length and measurement conditions. Comparisons with another product are meaningful only when test methodologies are comparable.
A suppressor does not make a firearm silent and does not remove the need for appropriate hearing protection.
A short presentation of Bulgarian HQS products. Retained from the previous page; this is a third-party video, not an official upload from the manufacturer's channel.
An ePIG Group feature covering HQS technologies and models, including Special Impact. Retained from the earlier page as an independent presentation.
The calibre, factory adapter and applicable restrictions must be confirmed by a qualified specialist.
Any inspection requires a completely unloaded and secured firearm and a fully cooled suppressor.
Overheating must be avoided. The previous product instructions specify a rate of up to six shots per minute for this model.
The functional intermediate openings must not be covered by a protective sleeve or other accessory.
Only maintenance products and methods permitted by HQS should be used. Avoid abrasive tools and unsuitable solvents.
Front-chamber assessment, servicing and work involving internal components require a qualified professional.
HQS was developed by a Bulgarian team experienced in materials science and precision metalworking. Its manufacturing background is associated with Bamex-98 AD in Karlovo, part of an industrial group with CNC machinery, measurement equipment and an EN ISO 9001:2015 quality-management certification.
Special Impact reflects the brand's engineering approach: dual-chamber architecture, precision machining and a front section designed for professional servicing.
One complete original Special Impact suppressor in the specified calibre configuration.
The actual mounting adapter, tools and any additional accessories depend on the factory package supplied with the individual unit.
Financing through TBI Bank may be discussed for this product, subject to the applicable banking terms, legal requirements and individual approval. Available terms and conditions are confirmed during an in-store consultation.
Financing does not change the legal conditions for acquisition. The suppressor cannot be purchased online or dispatched to the customer.
This product is not sold online. Purchase takes place exclusively at the MoskovHunt physical store, in compliance with all applicable legal requirements.
Acquisition is possible only upon presentation of the legally required documents and fulfilment of the applicable procedures. This product description is informational and does not constitute instructions for independent installation or technical modification.
Its dual-chamber acoustic construction, replaceable front section and published 42+ dB sound reduction, combined with a 302 mm overall length.
The configuration for calibres up to 7.62 mm / .30. Other factory calibre variants are separate products.
206 mm beyond the muzzle, compared with its 302 mm overall housing length.
The published figure for the described configuration is approximately 600 g.
A reduction in measured sound pressure under specified test conditions, not the final absolute noise level.
It is not presented as an X-Foam model. Special Impact uses its own dual-chamber architecture.
Its construction provides for professional servicing and replacement, following manufacturer instructions.
No. The listed threads are variants within the product range. The exact adapter must be checked for the individual unit.
They form a functional part of the pressure-relief arrangement and must not be blocked by a cover or wrapping.
No. Purchase takes place only at MoskovHunt's physical store, subject to legal requirements.
HQS Special Impact 7.62 (.30) · 42+ dB · 302 mm · 206 mm forward extension · Ø54/50 mm · approximately 600 g. Original HQS dual-chamber technology in a complete factory-built product.
For information about the actual thread, factory package, compatibility and legally required documentation, contact the MoskovHunt team.
MoskovHunt · 37 Tsar Simeon Street, 5900 Levski, Bulgaria.






