HQS Slim 6.5 (.264) Suppressor – Over-Barrel, 32+ dB
HQS Slim 6.5 (.264) Suppressor – Over-Barrel, 32+ dB
- Brand:HQS Team
- Product Code: Slim кал. 6.5 мм (.264) – Over-Barrel дизайн, лек и компактен
- Availability: In Stock
358.00 € / 700.19 лв.
368.00 € / 719.75 лв.15 11 2026 06 12 2026
Available Options
A slim profile, low weight and the distinctive balance of HQS engineering. Slim is the Bulgarian manufacturer's lightweight series, developed with an emphasis on practical dimensions and comfortable handling in hunting applications. Its design combines a narrow cylindrical housing with a reflex Over-Barrel construction.
The 6.5 mm (.264) version belongs to a separate calibre configuration within the Slim family. Current published series specifications include 250 mm overall length, 154 mm forward extension beyond the muzzle, 41 mm external diameter, 293 g weight and 32+ dB sound reduction.
This is the standard HQS Slim, not the shorter Slim XS or the X-Foam-equipped Slim X model.
HQS Slim was developed as a slimmer and lighter alternative to the standard HQS Hunter. Both series share a comparable single-piece internal core concept, while Slim has a narrower exterior and substantially lower weight.
These characteristics are especially relevant when carrying equipment over extended periods and during active hunting. Weighing 293 g, with an Over-Barrel construction that extends only 154 mm beyond the muzzle, Slim maintains a relatively compact forward profile compared with its overall length of 250 mm.
The model is intended for hunters who value the balance between acoustic reduction, size and weight without choosing the wider Hunter housing.
A lightweight configuration designed to limit the additional mass at the front of a hunting rifle.
A narrower outer diameter than the standard Hunter, which measures 54 mm.
A portion of the suppressor housing extends rearward around the barrel, limiting the length beyond the muzzle.
Of its 250 mm total length, 154 mm extend beyond the muzzle in a compatible configuration.
The published acoustic rating for the HQS Slim series under the relevant testing methodology.
A distinct factory calibre configuration, separate from the .223 and .30 versions.
An internal architecture developed with attention to weight and manufacturing precision.
Bulgarian engineering supported by the manufacturing experience and facilities of Bamex-98.
Length extending beyond the muzzle
Rearward reflex section surrounding the barrel, calculated from published dimensions
With a conventional Front-Barrel arrangement, most of the suppressor body remains forward of the muzzle. HQS Slim uses a different approach: Over-Barrel architecture, in which part of the housing extends backwards around the barrel.
The published dimensions are 250 mm overall length and 154 mm of forward extension. Their difference, approximately 96 mm, describes the rearward overlap around the barrel.
This gives the unit a shorter forward extension than its full housing length might suggest.
A proportional comparison of external dimensions, not a technical drawing or installation guide.
Diameter is one of the defining parameters when comparing suppressors. Slim has a narrower profile than Hunter, reducing the apparent bulk of the equipment.
The standard Hunter has a diameter of 54 mm, while the currently published diameter of Slim is 41 mm, a difference of 13 mm.
Actual compatibility with sights, barrel profile and other components must be assessed for the individual firearm.
These three HQS models offer different combinations of weight, dimensions and acoustic specifications. The comparison uses published figures for their respective factory configurations.
Published sound-pressure reduction for the Slim series
The 32+ dB rating describes a reduction in measured sound pressure under particular conditions. It does not indicate the final absolute noise level after fitting the suppressor.
HQS uses the MIL-STD-1474E testing methodology and a Larson Davis Spartan Model 821IH-QPR sound-level meter in its published testing information.
The actual result depends on the firearm, ammunition and measuring environment. A suppressor does not make a firearm silent and does not eliminate the need for appropriate hearing protection.
| Parameter | Specification |
|---|---|
| Manufacturer | HQS Team · Bulgaria |
| Brand | HQS · High Quality Suppressors |
| Model | Slim |
| Item code | 02120006 |
| Calibre configuration | Up to 6.5 mm / .264 |
| Design | Over-Barrel · reflex type |
| Overall length | 250 mm |
| Forward extension | 154 mm |
| Rearward reflex section | Approximately 96 mm, calculated from published dimensions |
| External diameter | 41 mm · current published series specification |
| Weight | 293 g |
| Published sound reduction | 32+ dB |
| Acoustic construction | Single-piece internal core |
| Material concept | Lightweight metallic HQS construction |
| Testing methodology | MIL-STD-1474E |
| Measuring equipment | Larson Davis Spartan Model 821IH-QPR |
| Other calibre variants in the series | Up to 5.6 mm, 7.62 mm, 8 mm, 9.3 mm and 10.3 mm – separate configurations |
| Factory threads offered within the series | M13×1, M14×1, M15×1, M16×1, M17×1, M18×1, 1/2"-20 UNF, 1/2"-28 UNEF, 5/8"-24 UNEF |
| Thread of the individual unit | According to the markings and original supplied configuration |
| Colour | Black matte housing |
| Related accessories within the range | Neoprene cover, grease, seals and maintenance tool – depending on the actual package |
| Manufacturing origin | Karlovo, Bulgaria |
| Acquisition | MoskovHunt physical store only, subject to legal requirements |
HQS Slim is available in various factory calibre configurations. This product page concerns the version up to 6.5 mm (.264). The separate 5.6 mm, 7.62 mm and other calibre versions should not be treated as identical products.
Mounting suitability depends on the specific factory thread, applicable limitations, alignment and barrel dimensions. The threads listed for the product family represent possible factory configurations, not a set of included adapters.
The .264 designation alone does not automatically establish suitability for every cartridge with a nominal 6.5 mm projectile diameter. The restrictions for the exact HQS configuration and applicable legal requirements must be followed.
HQS Slim follows a single-piece core concept similar to the standard Hunter, optimised for a smaller external diameter.
The design contributes to the published weight of only 293 g and the characteristic slim profile.
A matte black cylindrical housing carrying the recognisable factory HQS Slim branding.
Correct cleaning, moisture management and compliance with temperature limits are important for service life.
HQS Slim 6.5 (.264) is intended for hunting rifles with a corresponding approved factory calibre and mounting configuration. Its slim housing and low weight are of interest to hunters who prefer lighter equipment during extended periods of carrying.
Its reflex construction is particularly relevant when the objective is to limit the length extending beyond the muzzle. Actual suitability depends on the firearm, barrel profile and manufacturer restrictions.
Within the HQS product family, the standard Slim offers an alternative to the shorter XS version for those who prefer the dimensions and design of the full-length model.
The video retained from the previous product description explores HQS engineering and various models. It is an independent ePIG Group presentation. Specifications for Slim 6.5 (.264) are provided separately on this page.
The exact calibre version, mounting thread and compatibility with the individual firearm must be confirmed before use.
All inspections must be performed only with the firearm completely unloaded and secured and the suppressor fully cooled.
The housing can become extremely hot. Avoid overheating and observe the official operating limits for the model.
Moisture must not be allowed to remain trapped after use. Store the equipment in accordance with HQS instructions.
Use only manufacturer-approved cleaning methods and products, without sharp or abrasive tools.
If damage, incompatibility or internal-component problems are suspected, consult a qualified specialist.
HQS is a Bulgarian brand developed by a team with practical experience in hunting, materials science and precision machining. Manufacturing is associated with Bamex-98 AD in Karlovo, part of an industrial group with extensive production experience.
The company operates modern CNC equipment and quality-control systems. Bamex-98 maintains a quality-management system certified to EN ISO 9001:2015.
HQS Slim applies this manufacturing experience to a clearly defined product concept: a narrow housing, low weight and a practical reflex design.
One original complete HQS Slim suppressor in the designated factory calibre configuration.
The exact mounting thread and supplied accessories depend on the actual factory package of the individual unit.
This product is not sold online. Purchase takes place exclusively at the MoskovHunt physical store, in compliance with all applicable legal requirements.
Acquisition requires compliance with the applicable conditions and presentation of the necessary documents. This product description is informational and does not replace factory documentation or qualified technical advice.
A lightweight Over-Barrel reflex suppressor from Bulgarian manufacturer HQS, featuring a narrow housing and single-piece core.
This product page describes the configuration up to 6.5 mm (.264), item 02120006.
250 mm overall length and 154 mm of forward extension.
The published factory weight is 293 g.
The current HQS specification lists 41 mm for the standard Slim series.
The current manufacturer rating is 32+ dB under specified test conditions.
Part of the suppressor housing extends rearward around the barrel, reducing the overall length added beyond the muzzle.
Slim is lighter and narrower: 41 mm and 293 g compared with the standard Hunter at 54 mm and 497 g.
No. Slim XS is a separate compact X-Foam model measuring 199 mm overall, with different published specifications.
No. The listed threads are possible factory configurations. The actual thread must be established for the individual unit.
The original suppressor and any accessories listed in the actual factory package. Optional accessories are not automatically included.
Yes. The suppressor does not guarantee safe noise levels under all operating conditions.
No. Acquisition is possible only at the MoskovHunt physical store, subject to all applicable legal requirements.
HQS Slim 6.5 (.264) · Over-Barrel · 250 mm · 154 mm forward extension · Ø41 mm · 293 g · 32+ dB. A slim, lightweight Bulgarian suppressor for compatible hunting rifles.
For information about the exact mounting thread, factory package, availability and legal purchase requirements, contact the MoskovHunt team.
MoskovHunt · 37 Tsar Simeon Street, 5900 Levski, Bulgaria.









